UV exposure unit – Koraks tinkers

Shine a little light – A brief note on UV output degradation in LED floodlights

I’ve been using cheap & cheerful UV floodlights to expose my alternative process prints for a little over a year now. Since then, a few people have remarked that there’s a problem with these LED flood lights: their power output reduces as the unit operates due to the LEDs heating up. How bad is the problem, really, and what to do about it?

Kind of blue – A test with UV LEDs for DAS carbon transfer

So the 400nm LEDs I had been using since October or so worked really nice for dichromate carbon transfer, but I ran into trouble with DAS carbon with them. Some further testing with my bank of trusted Philips BL tubes and a little theoretical exercise suggested that at least some 365nm exposure is needed to get DAS carbon to harden reliably especially in the highlights. So I’ve been testing a bit with 365nm LED options – two in particular that seemed attractive. This is a small report on these tests.

DAS right! – Solving the teething problems of DAS carbon transfer

Previously I wrote about trouble I was running into with DAS-incorporated carbon tissue. I just couldn’t get those tissues to transfer properly. Well, looks like I figured out why. In the process, I received some useful advice to boot, and perhaps there are some myths being established as well. Are you starting out with DAS and running into issues? Maybe some of the info in this blog can be of help.

Beam me down, Scotty: a new ultra-simple UV light source

It’s been a while since I wrote a somewhat acrid blog about the 300W UV floodlight unit I bought from AliExpress. The tone was acrid, because 300W in reality turns out to be about 75W. The conclusion was somewhat counter-intuitive, as I also mentioned that I found the unit so abysmal, I planned to buy some more of them. The reason is simple: while the unit doesn’t live up to its specifications, it still gives a lot of bang for your buck, and most importantly, it’s super easy to implement. Well, you be the judge of that!